|
 |
|
 |
|
|
 |
Thank you for purchasing our ranges of Decals. Here are a few tips to make the most out of your new design:
It's a good idea to plan your design first. You can do this by making a sketch. Use Scotch tape or Blu-Tack to temporarily affix your patterns to your wall in the location and position you likes.
Be sure your walls is dry and free of dust or dirt. If your walls is dirty, bumpy or wet, the decals may not adhere properly. Wipe your walls and corners with a dry cloth to remove any dust or cobwebs. The decals is also sensitive to extreme temperature and direct sunlight.
Press firmly over the entire decals with your hands. Slowly peel the backing paper away from the decals. You should always peel at a 45-degree angle.
Be careful not to allow the adhesive side of the decals to fold onto itself after removed the backing paper as it's extremely sticky! Place one edge of the graphic onto the wall and, pressing firmly, move your hand slowly over the surface toward the opposite edge of the graphic. Scrap the decals using squeegee or plastic card to smooth out the surfaces. Remove the clear transfer tape carefully and you've just changed your walls
Please note that the decals has a low tack of adhesive, meant for interiors and is safe for most walls, but we cannot guarantee how all walls types will react to removal. |
|
|
|
|
|
 |
|
 |
|
